SPONSORED CONTENT
(Click to reveal)
PROTECTING MANUFACTURING GROWTH WHILE BUILDING 1.5 MILLION HOMES
TORONTO, AUGUST 27, 2024 – Canadian Manufacturers & Exporters (CME) applaud the Government of Ontario’s ...
22545603200
TORONTO, AUGUST 27, 2024 – Canadian Manufacturers & Exporters (CME) applaud the Government of Ontario’s ...
OTTAWA, AUGUST 26, 2024 – Canadian Manufacturers & Exporters (CME) has concerns about the changes to the ...
OTTAWA, AUGUST 26, 2024 – Canadian manufacturers welcome the federal government actions today to protect ...
OTTAWA, AUGUST 22, 2024 – Canadian Manufacturers & Exporters (CME) welcomes the Canada Industrial Relations ...
OTTAWA, AUGUST 22, 2024 – Canadian Manufacturers & Exporters (CME) applauds the federal government’s decisi
OTTAWA, AUGUST 21, 2024 – With a full shutdown of Canada’s rail network less than 24 hours away we call on ...
Toronto, August 19, 2024 – Excitement is building as Canadian Manufacturers & Exporters (CME) announces ...
OTTAWA, AUGUST 9, 2024 – Canadian Manufacturers & Exporters (CME) are calling for emergency meetings of the ...
TORONTO, JUNE 18, 2024 – The federal government could not have picked a worse time to cut $625 million in ...
OTTAWA, JUNE 5, 2024 – Canadian Manufacturers & Exporters is sounding the alarm regarding a possible ...
Ottawa, June 5, 2024 – Today, Canadian Manufacturers & Exporters (CME) led a group of top Canadian ...
Ottawa, May 28, 2024 – Canadian manufacturers are extremely disappointed that Members of Parliament have again ...
Toronto, May 9, 2024 – A new report by Canadian Manufacturers & Exporters (CME) says Ontario’s ...
WINNIPEG, APRIL 22, 2024 – After an extensive search, Canadian Manufacturers & Exporters (CME) is pleased to ...
OTTAWA, APRIL 16, 2024 – Canadian Manufacturers & Exporters (CME) was encouraged by new measures in Budget ...
OTTAWA, APRIL 11, 2024 – Amid the economic challenges of high interest rates, weak productivity growth, and a ...
April 2, 2024, Winnipeg, MB – While Canadian Manufacturers & Exporters (CME) members were pleased to see ...
Toronto, March 26, 2024 – “This budget signaled strong, stable support to Ontario’s manufacturing sector.
March 1, 2024, Edmonton, AB – Canadian Manufacturers & Exporters (CME) sees a number of positive measures in ...
Toronto, February 1, 2024 – Ontario manufacturers continue to face acute workforce needs with 18,900 jobs ...
Toronto, December 6, 2023 – Last night marked an illustrious celebration as the winners of the third annual ...
OTTAWA, NOVEMBER 22, 2023 – The federal government’s Fall Economic Statement addresses some of the uncertain
Ottawa, November 17, 2023 – Canadian Manufacturers and Exporters (CME) is delighted to announce the appointment ...
Ottawa, November 7, 2023 – A national housing crisis, climate change policies, persistent labour and skills ...
Toronto, November 2, 2023 – Today’s Fall Economic Statement reaffirmed the Ontario Government’s commi
OTTAWA (October 30, 2023) – Canadian Manufacturers & Exporters (CME) issued the following statement today ...
Ottawa, October 23, 2023 – Canadian Manufacturers & Exporters (CME) released the following statement re
Toronto, October 19, 2023 – As the Ontario government prepares to deliver its Fall Economic Statement on ...
Ottawa, October 11, 2023 – Canadian Manufacturers & Exporters (CME) and its members are concerned with ...
Toronto, October 6, 2023 – Canadian Manufacturers & Exporters (CME) proudly marked the third annual ...
Toronto, August 17, 2023 – On behalf of its Ontario Made program, Canadian Manufacturers & Exporters ...
OTTAWA (August 4, 2023) – Canadian Manufacturers & Exporters (CME) issued the following statement today ...
July 21, 2023. Ottawa, Ontario. Canadian Manufacturers & Exporters (CME) is hopeful the B.C. ports labour ...
July 19, 2023. Ottawa, Ontario. – Five days after an all-party resolution was obtained between the federal ...
July 13, 2023. Ottawa, Ontario – Canadian Manufacturers & Exporters (CME) welcomes the resolution agreed
Ottawa, July 4, 2023 – Canadian Manufacturers & Exporters (CME) is calling on all parties to negotiate an ...
Ottawa, June 29, 2023 – Canadian Manufacturers & Exporters is increasingly concerned about the disruption to ...
Ottawa, June 28, 2023 – A 72-hour strike notice has been given by the International Longshore and Warehouse ...
Ottawa, June 23, 2023 – Canadian Manufacturers & Exporters (CME) is urging the International Longshore and ...
Ottawa, June 19, 2023 – Canadian Manufacturers & Exporters (CME) has grown increasingly concerned that the ...
Toronto, May 31, 2023 – A shortage of skilled workers is threatening Canadian manufacturers’ ability to adopt ...
Canadian Manufacturers & Exporters (CME) launched a summary of key provisions in the 2023-24 Saskatchewan Prov
Ottawa, March 28, 2023 – Canadian Manufacturers & Exporters (CME) welcomes Budget 2023 and the initial steps ...
Sault Ste. Marie, March 28, 2023 – Algoma Steel and Tenaris plants in Sault Ste. Marie, Ontario opened their ...
Ottawa, March 24, 2023 – The undersigned members of the Canadian Manufacturing Coalition (CMC), a group of ...
Toronto, March 23, 2023 – Canadian Manufacturers & Exporters (CME) welcomes the commitment to advanced ...
Washington, D.C. and Ottawa, Canada, March 22, 2023 – The following is a joint statement from National ...
Saskatchewan, February 23, 2023 Saskatchewan Manufacturing Strategy: Policy Recommendation to Spur Manufacturing In
Plus, Three Manitoba Manufacturing Leaders Who Are Paving the Way for Women in Manufacturing WINNIPEG (March 6, ...
TORONTO, MARCH 3, 2023 – Women manufacturers from across the country will be coming together for three days, ...
February 28, 2023 – Victoria, BC – Canadian Manufacturers & Exporters (CME) sees some positive ...
Toronto, March 1, 2023 – Federal Economic Development Agency for Southern Ontario (FedDev Ontario) provides ...
Toronto, February 22, 2023 – Canadian Manufacturers & Exporters (CME) provided the Ontario government wit
Toronto, February 22, 2023 – On behalf of its Ontario Made program, Canadian Manufacturers & Exporters ...
Toronto, January 17, 2023 – On behalf of its Ontario Made program, Canadian Manufacturers & Exporters ...
Ottawa, January 10, 2023 – Canadian Manufacturers & Exporters (CME) is calling on Prime Minister Justin ...
2023 award recipients to be recognized at CME’s Gala Awards Dinner WINNIPEG (December 7, 2022) – Three local ...
Toronto, December 19, 2022 – Canada is continuing to navigate historically high job vacancies, according to ...
Alberta Manufacturing Strategy: Policy Recommendation to Spur Manufacturing Investment, Innovation and Job Creation
Toronto, December 6, 2022 – On behalf of its Ontario Made program, Canadian Manufacturers & Exporters ...
Toronto, December 6, 2022 – Members of the Canadian Manufacturing Coalition (CMC), a group representing ...
Toronto, November 23, 2022 – Canadian Manufacturers & Exporters (CME) President & CEO Dennis Darby ...
Toronto, November 22, 2022 – Canadian Manufacturers & Exporters President and CEO Dennis Darby called on ...
Toronto, November 14, 2022 – The Ontario government’s Fall Economic Statement (FES) today signaled its ...
Toronto, November 10, 2022 – Canadian Manufacturers & Exporters (CME) calls for Ontario’s Ministry of ...
Ottawa, November 3, 2022 – The Fall Economic Statement released today by Deputy Prime Minister Chrystia ...
OTTAWA, NOVEMBER 2, 2022 – Dennis Darby, President & CEO of Canadian Manufacturers & Exporters ...
Ottawa, November 1, 2022 – Canadian Manufacturers & Exporters (CME) welcomes the announcement of the ...
November 1, 2022. Ottawa – Canadian Manufacturers & Exporters (CME) appeared before the Standing Committe
Ottawa, October 31, 2022 – As the federal government plans to release its Fall Economic Statement Thursday, ...
St John’s, October 26, 2022 – Made Safe NL Manufacturing and Processing Safety Sector Council (Made Safe ...
Toronto, October 25, 2022 – Canadian Manufacturers & Exporters (CME) today released its annual labour ...
Halifax, October 4, 2022 – As Manufacturing Month kicks off for October, CME Nova Scotia is laser-focused on ...
Toronto, October 11, 2022 – At a meeting with Ontario’s Minister of Environment, Conservation and Parks, ...
Toronto, October 7, 2022 – Canadian Manufacturers & Exporters (CME) President & CEO Dennis Darby ...
Ottawa, October 6, 2022 – Canadian Manufacturers & Exporters (CME) applauds the recommendations found in ...
Ottawa, October 5, 2022 – Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME), ...
Toronto, September 29, 2022 – Ontario’s manufacturers welcome the announcement today by the Ontario gov
Ottawa, September 20, 2022 – Canadian Manufacturers & Exporters (CME) is calling on the federal ...
Ottawa, September 7, 2022 – Canadian Manufacturers & Exporters (CME) supports the Bank of Canada’s fight ...
Toronto, August 9, 2022 – Today’s Speech from the Throne placed manufacturing at the core of the ...
Ottawa, July 13, 2022 – Today’s 100-basis-point rate hike from the Bank of Canada is aimed at quelling ...
Ottawa, June 23, 2022 – A new report by Canadian Manufacturers & Exporters (CME) provides detailed ...
Ottawa, June 20, 2022 – The federal government detailed its plans to ban the import and manufacture of ...
A new forecast by CME shows the sector is contributing to Canada’s post-pandemic economic recovery.
CME is calling on the federal government to provide temporary financial relief to companies impacted by supply ...
CME welcomes the commitment in Ontario’s 2022 Budget to work side by side with the manufacturing sector to ...
CME is pleased to extend its service offerings to Ontario’s manufacturing sector through complimentary training ...
CME today released its Ontario Manufacturers’ Platform for Prosperity, outlining a provincial strategy to restore
CME welcomes initiatives announced in Budget 2022 to stimulate innovation and investment and to ensure more ...
CME is concerned that removing the secret ballot vote from union certification will expose the process to ...
CME welcomes the announcement of the Temporary Foreign Worker (TFW) Program Workforce Solutions Road Map by ...
CME and Make UK welcome the launch of new negotiations for an enhanced and comprehensive free trade agreement ...
CME is calling on Canada Pacific Railway and the Teamsters Canada Rail Conference to come to an immediate ...
CME launches the Manufacturing Accelerator Program (or MAP initiative), designed to help Manitoba’s manufacturers
The Canadian Manufacturing Coalition today issued the following statement on the looming labour disruption at CP ...
A new member survey by CME shows that nine out of 10 Canadian manufacturers are encountering supply chain ...
Today marks the first day of the 5th Annual Women in Manufacturing Success Forum organized by ...
CME welcomes the federal government’s plan to eliminate the PCR testing requirements by February 28, ...
CME hosted an emergency roundtable meeting between CME member manufacturers and the Minister of Transport, Omar ...
A group of leading business trade associations issued a statement on blockades affecting key trade corridors and ...
CME is calling for the government to bring an immediate end to the trucker blockade at the Canada-U.S. border ...
CME Monday called on the federal government to immediately speed up immigration to address severe labour ...
The Canadian Manufacturing Coalition (CMC) today met with Industry Minister Francois-Philippe Champagne, stressing
CME is calling on the Canadian and United States governments to delay vaccine mandates for cross-border ...
CME is calling on Finance Minister Chrystia Freeland to propose a comprehensive plan to address major challenges ...
CME announces that Elise Maheu, VP of Government Affairs and Markets, 3M Company (Canada) has become chair of our ...
CME today released the results of their national business outlook survey of manufacturing companies.
Ahead of tomorrow’s speech from the throne, CME is calling on the federal government to adopt a national ...
CME is calling on PM Trudeau and Canadian officials to press President Joe Biden for exemptions for Canadian ...
CME issued the following statement in response to the Government of Ontario’s 2021 Fall Economic ...
CME today issued the following statement following Prime Minister Justin Trudeau’s speech at the COP26 summit in ...
CME introduces a brand-new grant program, Retrain Manitoba, an initiative of the Province of Manitoba.
CME today issued the following statement on the growing “Buy American” protectionist threat to Canadian ...
CME congratulates the new cabinet and looks forward to working with new ministers on Canadian manufacturers’ ...
Véronique Proulx, SVP Communications & Marketing at CME, and Lead for MEQ, has been named to WXN's Top 100 ...
CME urges the new government, armed with a fresh mandate, to prioritize the manufacturing sector, and cement its ...
A survey conducted by CME shows that more than two out of three Canadian manufacturers (69%) support the use of a ...
CME unveils its platform for the 2021 federal election today, which outlines a national strategy to restore ...
CME issues the following statement in response to the work-to-rule strike action taken by Canada Border Service ...
CME is concerned that new details of the US Buy American policy will hurt Canadian manufacturers. ...
CME issues a statement in reaction to the Canada Border Services Agency (CBSA) officers’ imminent strike ...
In reaction to Canada’s border reopening plan, CME is asking the government to remove all restrictions for ...
CME is calling on the federal government to present a plan to reopen the borders ...
CME believes that Canada urgently needs to ensure fairness in commercial dealings between large grocery retailers ...
CME welcomes the federal government’s decision to increase Canada’s rapid testing capacities.
Ottawa, April 27, 2021 – Canadian Manufacturers & Exporters (CME) commends Minister Tassi and the federa
Ottawa, April 20, 2021 – Statement on behalf of the President and CEO of Canadian Manufacturers & ...
Ottawa, April 19, 2021 – Over the past year the role and importance of the manufacturing sector has been on ...
Ottawa, April 16, 2021 – Statement on behalf of the President and CEO of Canadian Manufacturers & ...
Ottawa, April 14, 2021 – As Deputy Prime Minister and Minister of Finance, Chrystia Freeland, is set to ...
Toronto, April 12, 2021 – The Port of Montreal’s longshoremen have announced that they will start a ...
Toronto, April 7, 2021 – Canadian Manufacturers & Exporters (CME) expresses deep concern over the recent ...
Toronto, March 24, 2021 – Canadian Manufacturers & Exporters (CME) welcomes supports in Ontario’s 2021 ...
Ottawa, March 12, 2021 – Today concludes the 4th Annual Women in Manufacturing Success Forum organized by ...
Ottawa, March 8, 2021 – As today marks the start of the 4th Annual Women in Manufacturing Success Forum ...
Ottawa, January 18, 2021 – Canadian Manufacturers & Exporters (CME) is urging the federal government to ...
Ottawa, January 12, 2021 – On behalf of Canada’s 90,000 manufacturers and the 1.7 million Canadians ...
Toronto, January 12, 2021 – Canadian Manufacturers & Exporters (CME) welcomes today’s announcement by t
TORONTO, ON, Dec. 18, 2020 – Canadian Manufacturers & Exporters (CME) is happy to announce the ...
OTTAWA, ON, Dec. 11, 2020 – Canadian Manufacturers & Exporters (CME) welcomes a number of measures ...
OTTAWA, ON, Dec. 11, 2020 – Canadian Manufacturers & Exporters (CME) commends the federal government for ...
OTTAWA, ON, Dec. 10, 2020 – Canadian Manufacturers & Exporters (CME) joined the 50 – 30 Challenge ...
OTTAWA, ON, Dec. 2, 2020 – The Canadian Manufacturers & Exporters biennial Management Issues Survey, ...
OTTAWA, ON, Nov. 30, 2020 – Canadian Manufacturers & Exporters (CME) welcomes the $100 billion stimulus ...
OTTAWA, ON, Nov. 7, 2020 – With Joe Biden winning the US presidential election, Canadian Manufacturers & ...
Toronto, November 5, 2020 – Dennis Darby, President & CEO of Canadian Manufacturers & Exporters (CME), ...
OTTAWA, ON, Nov. 3, 2020 – Canadian Manufacturers & Exporters (CME) welcomes the announcement made today ...
OTTAWA, ON, Oct. 30, 2020 – Canadian Manufacturers & Exporters (CME) applauds the increase to ...
For generations, Ontario’s strong manufacturing sector has secured our role as the economic engine of Canada and ...
The Government of Ontario, Canadian Manufacturers & Exporters (CME), and BlackBerry today announced a partnersh
OTTAWA, ON, Oct. 10, 2020 – Canadian Manufacturers & Exporters (CME) welcomes the new federal support ...
OTTAWA, ON, Oct. 7, 2020 – Canadian Manufacturers & Exporters President and CEO Dennis Darby issued the ...
OTTAWA, ON, Oct. 2, 2020 – Dennis Darby, President & CEO of Canadian Manufacturers & Exporters (CME) ...
Ottawa, Ont., September 24, 2020 – Canadian Manufacturers & Exporters President and CEO Dennis Darby issued ...
Ottawa, September 15, 2020 – Dennis Darby, President & CEO of Canadian Manufacturers & Exporters (CME), ...
OTTAWA (August 27, 2020) – The McGill Engine Centre (https://www.mcgill.ca/engine/) out of the Faculty of ...
OTTAWA (August 21, 2020) – Canadian Manufacturers & Exporters (CME) issued the following statement today ...
Canadian Manufacturer & Exporters (CME) congratulates the government for putting an end to all section 232 US ...
OTTAWA (July 8, 2020) – Canadian Manufacturers & Exporters (CME) takes note of the fiscal economic update ...
OTTAWA, (July 1, 2020) — Canadian Manufacturers & Exporters (CME) congratulates Canada, the United States ...
OTTAWA (June 22, 2020) – CME released today “Manufacturing our Future” a three-phased strategy to ...
OTTAWA (June 8, 2020) — Over the last weeks, the federal government has put in place a number of business ...
OTTAWA (MAY 27, 2020) – Canadian Manufacturers & Exporters (CME) and leading Canadian manufacturers from ...
EDMONTON (May 26, 2020) — Canadian Manufacturers & Exporters (CME) is pleased to announce the addition ...
Canadian Manufacturers & Exporters (CME) and leading Canadian manufacturers from across the country will share ...
TORONTO (May 25, 2020) – A new Canadian Manufacturers & Exporters (CME) survey of 320 manufacturers across ...
OTTAWA (May 11, 2020) – Canadian Manufacturers & Exporters (CME) welcomes the Large Employer Emergency ...
TORONTO (MAY 1, 2020) – Manufacturers welcome the Government of Ontario’s decision to defer a portion of ...
OTTAWA (APRIL 24, 2020) – Canadian Manufacturers & Exporters (CME) is encouraged by the announcement of ...
OTTAWA (April 8, 2020) – Canadian Manufacturers & Exporters (CME) welcomes the changes to the Canada ...
OTTAWA (April 8, 2020) – Canadian Manufacturers & Exporters applauds the government for taking swift and ...
OTTAWA (APRIL 1, 2020) – CME welcomes the federal government’s historic $71 billion investment in the new ...
OTTAWA (March 30, 2020) – CME welcomes the extension of wage subsidies to all employers announced today that ...
OTTAWA (March 27, 2020) – CME welcomes the new measures announced today to help manufacturers stay in ...
OTTAWA (March 27, 2020) – A new report by the Canadian Manufacturers & Exporters details the effects of the ...
TORONTO (March 25, 2020) — CME welcomes the Government of Ontario’s fiscal update released today which ...
OTTAWA (March 25, 2020) – Canadian Manufacturers & Exporters is calling on the government to provide ...
TORONTO (March 23, 2020) – Canadian Manufacturers & Exporters accepts the necessity of the 14-days ...
OTTAWA (March 21, 2020) – Four of Canada’s leading business organizations are calling on governments to ...
OTTAWA (March 20, 2020) – Canadian Manufacturers & Exporters (CME) applauds the government’s industrial
TORONTO (March 18, 2020) — Auto manufacturers announced today they will temporarily close their production ...
OTTAWA (March 18, 2020) – Canadian Manufacturers & Exporters (CME) welcomes the announcement today by ...
OTTAWA (March 16, 2020) – Canadian Manufacturers & Exporters (CME) welcomes the extraordinary efforts of the ...
OTTAWA (March 14, 2020) – CME applauds Finance Minister Morneau’s announcement of the creation of a $10 ...
OTTAWA (March 11, 2020) – The federal government announced today measures to respond to COVID-19. While the ...
OTTAWA (March, 2020) –Manufacturing is the backbone of many communities across southern Ontario. Advancements
OTTAWA (March 03, 2019) – February was devasting for Canadian manufacturers and the economy. The rail ...
Ottawa (February 28, 2020) – Today, with the conclusion of the House of Commons Standing Committee on ...
OTTAWA (February 24, 2020) – Today, several dozen industry associations met to exchange information about the ...
OTTAWA (February 24, 2020) – Manufacturers across Canada are disappointed Teck Frontier oil sand mine project ...
VICTORIA (February 18, 2020) – Canadian Manufacturers & Exporters (CME) is disappointed the BC budget ...
TORONTO (February 18, 2020) – Canadian Manufacturers & Exporters and Presidents of two leading Canadian ...
TORONTO (February 13, 2020) – Canadian Manufacturers & Exporters (CME) and Environment and Climate Change ...
OTTAWA (February 11, 2019) — Canadian Manufacturers and Exporters (CME) is urging federal and provincial ...
OTTAWA (February 6, 2020) – Five of Canada’s leading business organizations are calling on Ottawa to ensure ...
LETHBRIDGE, AB (January, 31, 2019) – Girl Guides between the age of 9 and 12 participated today to a tour of the ...
OTTAWA (January 30, 2019) — The Canadian Manufacturing Coalition (CMC) which is comprised of over 30 ...
Ottawa January 29, 2020 – A group of Canadian business organizations today issued the following ...
OTTAWA, (January 17, 2020) — Canadian Manufacturers & Exporters (CME) congratulates the United States Senate ...
OTTAWA (December 5, 2019) — Canadian Manufacturers & Exporters is pleased the federal government recognized ...
OTTAWA, (December 10, 2019) — Canadian Manufacturers & Exporters (CME) congratulates the Canadian Governm
OTTAWA (December 10, 2019) – A group of Canadian business organizations today urged the federal government to ...
Ottawa (December 5. 2019) — Canadian Manufacturers & Exporters is pleased the government recognized in ...
TORONTO (December 3, 2019) – Canadian Manufacturers & Exporters (CME) released today “Industry 4.0 and ...
REGINA (November 26, 2019) – Canadian Manufacturers & Exporters (CME) have awarded Saskatoon-based Crestline
TORONTO (November 26, 2019) — London Economics International (LEI) released a report today highlighting the ...
ST JOHN’S (November 21, 2019) – Over 150 manufacturers for across Newfoundland and Labrador congregated today ...
OTTAWA (November 20, 2019) – On behalf for Canada’s 90,000 manufacturers and the 1.7 million Canadians ...
OTTAWA (November 21, 2019) — Canadian Manufacturers and Exporters (CME) is urging the federal government to ...
OTTAWA (November 2019) – Canadian Manufacturers & Exporters (CME) is proud to announce that it has been ...
November 6, 2019 (Toronto, ON) – Today, the Ontario Government released its Fall Economic Statement which is set ...
Canadian Manufacturers and Exporters (CME) is creating the Manufacturing and Processing Safety Sector Council (MPSS
Toronto, ON – OCTOBER 28, 2019 Toronto, ON – Today, the Ontario Government announced its fall red tape ...
One hundred young women aged 14 and 15 visited today the Algoma Steel and Tenaris’s AlgomaTubes plants as part ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exporters issued today the following statement ...
OTTAWA (October 17, 2019)– Canadian Manufacturers & Exporters (CME) and Fiera Foods proudly announced the
Canadian Manufacturers & Exporters (CME) released a report today on labour & skills shortages, which ...
Ahead of the English leaders debate tonight, Canadian manufacturers are concerned that so far this election, there ...
OTTAWA (October 1, 2019) – Canadian Manufacturers and Exporters (CME) asks all federal parties to commit to ...
TORONTO (September 24, 2019) — Canadian Manufacturers & Exporters (CME) congratulates the Government of O
OTTAWA (September 23, 2019) – Manufacturing jobs offer rewarding, stable and full-time employment to 1.7 ...
OTTAWA (September 11, 2019) — As political parties officially begin their campaign today, manufacturers are ...
OTTAWA (September 4, 2019) — Canadian Manufacturers applaud the decision of the NAFTA Panel that ruled that ...
Canadian Manufacturers & Exporters (CME) released today its list of 10 key recommendations to accelerate the ...
OTTAWA (August 8, 2019) — CME recently released a submission on the Clean Fuel Standards (CFS) highlighting ...
Canadian Manufacturers & Exporters’ (CME) is relocating its corporate office and Ontario divisional offic
Earlier today, CME joined 45 other business organizations in withdrawing from the ongoing Patterson review of ...
TORONTO (August 15, 2019) — Manufacturers support the Government of Ontario’s intention for industry to ...
OTTAWA (August 14, 2019) – According to the OECD (Organization for Economic Cooperation and Development), ...
Canadian manufacturers congratulate Minister Freeland for meeting with her German counterpart. “Germany is settin
Dennis Darby, President & CEO issued today the following statement with regards to Canada’s trade ...
OTTAWA (August 6, 2019) – CME submitted August 2nd its pre-budget consultations submission to the House of ...
VANCOUVER (July 25, 2019) – Canadian Manufacturers & Exporters (CME) signed July 19 a submission to the ...
HALIFAX (July 24, 2019) – Canadian Manufacturers & Exporters (CME) released today “Unlocking Atlantic C
OTTAWA (July 17, 2019) — The Canadian Chamber of Commerce, the Business Council of Canada and Canadian ...
OTTAWA (July 16, 2019) — Dennis Darby, President & CEO of Canadian Manufacturers & Exporters (CME) ...
OTTAWA (July 9, 2019) – Canadian Manufacturers & Exporters (CME) is pleased Canada’s Premiers are meeting ...
OTTAWA (July 2, 2019) – Dennis Darby, President & CEO issued the following statement with regards to ...
WINNIPEG (June 18, 2019) — In celebration of 100 years of support for Manufacturing in Manitoba, the ...
OTTAWA (June 18, 2019) — Dennis Darby, president & CEO of Canadian Manufactuers & Exporters (CME) ...
OTTAWA (June 12, 2019) – Dennis Darby, President & CEO, issued, today, the following statement with ...
Dennis Darby, President and CEO of CME issued the following statement with regards to the red-tape reduction ...
OTTAWA (June 03, 2019) – Parliamentarians need to support Bill C-69, as it was amended by the Senate ...
Manufacturers are pleased the government put in place a framework to re-invest carbon tax revenues for SMEs in ...
Canadian Manufacturer & Exporters (CME) congratulates the government for putting an end to all section 232 US ...
(Toronto – May 15, 2019) – Today, Dennis Darby, CEO of the Canadian Manufacturers and Exporters, Dave ...
Proposed legislative changes to the labour law were introduced by the provincial government earlier this week that ...
EDMONTON (April 17, 2019) — Canadian Manufacturers & Exporters (CME) congratulates Premier-Designate Jaso
TORONTO (April 11, 2019) – The 2019 Ontario Budget was another step forward for this government in addressing ...
Balanced and flexible employment standards legislation allows our already challenged manufacturers to remain compet
(OTTAWA, MARCH 19, 2018) – Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME) ...
OTTAWA, ONTARIO – Dennis Darby, President and CEO of the Canadian Manufacturers and Exporters (CME), will be ...
Kitchener, ON (March 6, 2019) – Rhonda Barnet, President & COO of Steelworks Design and CME Women in ...
OTTAWA (February 21, 2019) — At a Senate Committee hearing today, CME highlighted Bill C-69, as written, ...
“The budget contains very little to support manufacturers in British Columbia,” said Andrew Wynn-Williams, Divi
Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued today the following statement ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued today the following statement ...
Dennis Darby, President and CEO of Canadian Manufacturers & Exporters issued today the following statement ...
January 14, 2019 – Three local business leaders and two Manitoba organizations will receive this year’s ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued today the following statement ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued today the following statement ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued today the following statement:
TORONTO (December 03, 2018) – Dennis Darby, President & CEO of Canadian Manufacturers & Exports issued ...
Andrew Wynn-Williams, Divisional Vice President of CME for British Columbia released today the following statement ...
Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME) released the following statement ...
Canadian Manufacturers & Exporters (CME) hosted the CME Trade Summit 2018. Over 115 delegates from across ...
Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME) released the following statement ...
Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME) released the following statement ...
Dennis Darby, President and CEO of Canadian Manufacturers & Exporters (CME) released the following statement ...
Canadian Manufacturers & Exporters (CME), today launched the We Can Do It! which aims to increase female ...
CME issued today its biannual Management Issues Survey (MIS), a robust report that takes the pulse of the ...
Dennis Darby, President & CEO of Canadian Manufacturers & Exporters stated: “After several months of work
On September 13, 2018, the Canada Employment Insurance Commission (CEIC) announced that the 2019 EI premium rate ...
Canadian Manufacturers & Exporters (CME) welcomes the release of Canada’s Economic Strategy Tables Report, a ...
Canadian Manufacturers & Exporters (CME) applauds the Workplace Safety & Insurance Board (WSIB) for moving ...
Canadian Manufacturers & Exporters (CME) welcomes the signing of the United States-Mexico-Canada Agreement (USM
Canadian Manufacturers & Exporters (CME) has launched Fuelling Canada’s Future, an initiative developed in re
Canadian Manufacturers & Exporters (CME) released today, in partnership with KPMG, Stalled Trade: Gearing up C
“Today’s announcement by the federal government that only a small proportion of carbon tax revenue will ...
Canadian Manufacturers & Exporters (CME) welcomes the release of Canada’s Economic Strategy Tables Report, a ...
Canadian Manufacturers & Exporters (CME) is in full support of the Canadian and Mexican steel associations who ...
The Honourable Maryam Monsef, Minister of Status of Women, today announced that Canadian Manufacturers & ...
Canadian Manufacturers & Exporters (CME) is pleased to announce the establishment of a scholarship awards ...
Canadian Manufacturers & Exporters (CME) congratulates the Ontario government for introducing legislation to re
National Association of Manufacturers (NAM) President and CEO Jay Timmons and Canadian Manufacturers & Exporter
Canadian Manufacturers & Exporters (CME) and the Canadian Manufacturing Coalition, and our partners Food & ...
Canadian Manufacturers & Exporters (CME) applauds the Government of Canada for taking decisive action to ...
Canadian provincial and territorial finance ministers are gathering today in Ottawa to meet with Federal Finance ...
CME testified today before the House of Commons Standing Committee on International Trade in the context of its ...
Canadian Manufacturers & Exporters (CME), together with BDO Canada, released today “Restoring Canada̵
Step into the spotlight and celebrate your success. It’s easy to apply, or to nominate a business. Visit ...
Canadian Manufacturers & Exporters (CME) condemns the decision of the U.S. Administration to levy tariffs of ...
Canadian Manufacturers and Exporters (CME) is urging the federal government to step in and facilitate dispute ...
Canadian Manufacturers & Exporters (CME), is calling on the federal government to immediately take action on ...
Canadian Manufacturers & Exporters (CME) is pleased the Ontario government acted some of the priorities of the ...
According to Statista, arguably the major international global market research organization, the number of Internet
Canadian Manufacturers & Exporters (CME) is proud to host today the first Women in Manufacturing (WIM) Success ...
Canadian Manufacturers & Exporters (CME) is relieved the U.S. administration has decided to exempt Canada from ...
Canadian Manufacturers & Exporters (CME) congratulates the federal Minister of International Trade for today ...
There are no results that match all of the filtered criteria below:
To see more results, try removing some of the filters above, or clear all filters to see all results: